Get a price
Guides
At dusk in a softly lit living room, a woman turns a white rotary dimmer on the wall, its ring glowing warm white, with recessed downlights above the sofa behind her.

Lighting control kits

ReadyToGo

by

Simple lighting control, one room at a time.

Scroll Skip to the kits

Lighting control, without the control system.

Matched kits that switch and dim one room. Wire them in, and the lights respond.

Control, room by room

Start simple. Grow when you need to.

Most rooms need far less than a full control system. A matched kit gives each room just the control it needs.

  1. The same floor with a ReadyToGo kit in each room, joined to that room’s lights by a DALI line. Each room is set to its own level. Meeting room Open office Kitchen Reception Quiet room

    ReadyToGo

    One kit per room.

    A matched kit in each room. Dim and switch from day one, and add groups and scenes from a phone. No programming.

From a kit to a full system, the DALI lights and their wiring stay. Only the controls grow.

An electrician presses a white rotary wall plate into place in a bright, nearly finished living room, with a small white enclosure on the step ladder beside her.

For electricians

Wire it in. It works.

Each kit arrives matched and ready. The broadcast kits need no addressing, no programming and no commissioning.

What's in a kit

One control. One line.

A control on the wall and a DALI power supply, joined to your lights by a two-wire DALI line.

Diagram of a ReadyToGo kit: a wall control and a DALI power supply joined to three DALI lights by a two-wire DALI line, with 230 volt mains to the power supply and to each light. 230 V DALI 1234
1: The control.. A rotary, push button or smart switch on the wall. 2: The DALI power supply.. 70 mA, in its own enclosure for safe in-wall wiring. It powers the DALI line. 3: The DALI line.. Two wires from light to light. One press reaches every light at once. 4: Your lights.. Up to 30 DALI lights on one kit, each with its own permanent mains supply.
A calm living and dining room in the evening, lit by small recessed downlights and a warm strip under a floating oak shelf.

Dimming

Turn to dim. Press for on and off.

One rotary sets the whole room, from bright enough to clean up to a low evening glow.

A white glass rotary control on a living room wall, its ring glowing warm orange, the sofa and windows out of focus behind it.

Tunable white

Warm to cool, with a twist.

Press to switch, hold to dim, rotate to tune DALI tunable white lights. The ring shows the light's status and colour.

At night an older man walks along a care-home corridor, holding the handrail, the lights around him bright and the corridor behind him softly dimmed, with a small round sensor in the ceiling above.

Sensors

Light that follows people.

A ceiling sensor with its own DALI power supply brings the lights up as someone arrives, and down again once the space is empty.

A bright meeting room with a timber table, recessed downlights, a round ceiling sensor and a small three-button switch beside the door.

Meeting rooms

The room keeps up with the meeting.

A three-button wireless switch and a sensor, ready paired. Switch, dim and recall presets; the sensor handles arriving and leaving.

A white push-button switch with a small blue indicator on a warm timber-panelled wall.

Push button

A light switch that dims.

Press for on or off, hold to dim. As familiar as any switch on the wall.

Choosing a kit

Which kit for which room?

Start with what the room needs. Each kit has a standard diagram, drawn here in short.

  • Dim from the wall

    DALI broadcast rotary or push button kit

    Rotary or button, DALI to DALI power supply, DALI to Up to 30 lightsDALIDALIRotary or buttonDALI power supplyUp to 30 lights

    Every light in the room together. Wire it in and it works.

    The specs: DALI broadcast rotary or push button kit

  • Buttons for scenes

    Smart DALI control switch

    1 to 3 buttons, DALI to DALI power supply, DALI to Up to 30 lightsDALIDALI1 to 3 buttonsDALI power supplyUp to 30 lights

    One, two or three buttons, each set to on/off, dimming, a scene or a preset level.

    The specs: Smart DALI control switch

  • Lights that follow people

    DALI sensor kits

    Sensor, 8 m, DALI to Up to 15 lightsDALISensor, 8 mUp to 15 lights

    The sensor powers its own DALI line, so it needs no separate power supply.

    The specs: DALI sensor kits

  • A meeting room

    Meeting room solution

    3-button switch, Wireless to Sensor, DALI to Up to 15 lightsWirelessDALI3-button switchSensorUp to 15 lights

    A wireless switch paired to the sensor, so there is no control cable to the switch.

    The specs: Meeting room solution

  • Warm to cool

    Tunable white dimmer solution

    Smart rotary, Wireless to Bridge + power, DALI to Tunable white lightsWirelessDALISmart rotaryBridge + powerTunable white lights

    Wired for up to 30 lights, or wireless through a bridge for up to 15.

    The specs: Tunable white dimmer solution

  • LED strip

    Wireless rotary PWM dimmer kit

    Smart rotary, Wireless to PWM dimmer, 12–24 V DC to LED stripWireless12–24 V DCSmart rotaryPWM dimmerLED strip

    For 12 V or 24 V strip: single colour, tunable white or RGB. Add your own DC power supply.

    The specs: Wireless rotary PWM dimmer kit

  • DALI
  • Wireless
  • 12–24 V DC

One room, or the whole building?

ReadyToGo controls one room at a time. When a whole building needs to work together, wireless DALI-2 links every room without new control cabling.

Request a quote Wireless DALI-2 control

ReadyToGo

Simple control for the room you're in.

More guides

The kits

ReadyToGo works with any lighting. The DALI kits control DALI lights, the PWM kit drives 12 V or 24 V LED strip, and the wireless switch kit switches any lighting circuit up to 10 A. Every kit comes in white or black.

A white rotary dimmer on a pale stone wall beside a warmly lit kitchen.

DALI switch kits

A wall control, a 70 mA DALI power supply and a field-mount enclosure for safe 240 V in-wall wiring. Wire it up and the lights respond.

  • DALI broadcast rotary kit

    A rotary dimmer for DALI lights. Turn the knob to dim up or down; press it to switch the lights on or off.

    Controls
    Up to 30 DALI lights
    Setup
    No addressing, programming or commissioning
    Power supply
    70 mA DALI, with field-mount enclosure
    Kits
    One-way or two-way
    Switching
    Combine up to four kits for two, three or four-way switching
    Wiring
    0.5 to 0.75 mm², 100 mm flylead supplied
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C
    Enclosure
    Polycarbonate, W94 × H19 × D37 mm

  • DALI broadcast push button kit

    An illuminated push button. Press to switch the lights on or off; press and hold to dim.

    Controls
    Up to 30 DALI lights
    Setup
    No addressing, programming or commissioning
    Power supply
    70 mA DALI, with field-mount enclosure
    Kits
    One-way or two-way
    Switching
    Combine up to four kits for two, three or four-way switching
    Wiring
    0.5 to 0.75 mm², 100 mm flylead supplied
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C
    Enclosure
    Polycarbonate, W94 × H19 × D37 mm

  • Smart DALI control switch

    A one, two or three button switch. It works as a broadcast switch out of the box; each button can then be set over Bluetooth from a free Android app.

    Controls
    Up to 30 DALI lights
    Buttons
    1, 2 or 3
    Button actions
    Dimmer, on/off, scene, preset level; colour temperature and colour on DT8 lights
    Power supply
    70 mA DALI, with field-mount enclosure
    Indicator
    LED in red, green, yellow, dark blue, pink, light blue or white, or off
    Supply
    240 VAC
    Mounting
    Standard 84 mm plate
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C
A white glass smart rotary with a glowing ring on a living room wall.

Tunable white and LED strip kits

One smart rotary: press to switch, hold to dim, rotate for colour temperature or colour. Its ring shows the status and colour of the light.

  • Tunable white dimmer solution

    One rotary to switch, dim and change the colour temperature of DALI tunable white (Device Type 8) lights. Choose a wired or a wireless kit.

    Wired kit
    Smart rotary, 70 mA DALI power supply, field-mount enclosure. Up to 30 lights.
    Wireless kit
    Smart rotary, wireless DALI bridge with 70 mA DALI power supply, enclosures. Up to 15 lights.
    Lights
    DALI Device Type 8 tunable white
    Setup
    No programming, no Wi-Fi
    Expansion
    Add rotaries for two-way or more; add bridges or DALI power supplies for more lights
    Wireless range
    Keep each device within 15 m of the next
    Mounting
    Standard 84 mm plate
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C

  • Wireless rotary PWM dimmer kit

    A wireless smart rotary and a PWM dimmer for 12 V or 24 V DC LED strip, with no control wiring between them. A DC power supply is needed and is not included.

    Includes
    Smart rotary and PWM dimmer
    LED strip
    Single colour, tunable white or RGB
    Output
    12 to 24 V DC, up to 10 A per dimmer
    Setup
    Paired before delivery, no Wi-Fi
    Expansion
    Add rotaries for more switch points; add dimmers beyond 10 A
    Wireless range
    Keep each device within 15 m of the next
    Mounting
    Standard 84 mm plate
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C
A warmly lit corridor at night with a round ceiling sensor.

Sensor kits

Each PIR sensor has a built-in 35 mA DALI power supply, so it controls a room's lights on its own. 8 m detection when mounted between 2 m and 12 m.

  • Bluetooth programmable DALI PIR sensor, 8 m

    Detects movement across an 8 m diameter. Settings are changed over Bluetooth from a free Android app.

    Controls
    Up to 15 DALI lights (35 mA built-in supply)
    Detection
    PIR and light level; 8 m diameter
    Mounting height
    2 to 12 m
    Settings
    Time-out, warn before off, daylight harvesting, dusk and disable lux levels
    Supply
    220 to 240 V, 50 Hz
    Rating
    IP54 front face; IP65 with a surface or wall mount kit
    Colours
    White or black
    Recess cut-out
    Min Ø80 mm

  • IR programmable DALI PIR sensor, 8 m

    The same 8 m detection, set up with a hand-held infrared remote.

    Controls
    Up to 15 DALI lights (35 mA built-in supply)
    Detection
    PIR and light level; 8 m diameter
    Mounting height
    2 to 12 m
    Settings
    Time-out, warn before off, dusk and disable lux levels
    Programming
    Infrared remote, available separately
    Supply
    220 to 240 V, 50 Hz
    Rating
    IP54 front face; IP65 with a surface or wall mount kit
    Colour
    White
    Recess cut-out
    Min Ø83 mm

  • Programmable DALI sensor with relay and 2 switch inputs

    The most flexible sensor. It adds a 10 A relay and two switch inputs, so it can also switch a non-DALI load or take a wall switch.

    Controls
    Up to 15 DALI lights (35 mA built-in supply)
    Relay
    10 A at 240 VAC; works independently of the DALI line
    Inputs
    2 switch inputs
    Detection
    PIR and light level; 8 m diameter
    Settings
    Time-out, corridor mode, daylight harvesting, lux levels; switch type and actions
    Supply
    220 to 240 V, 50 Hz
    Rating
    IP54 front face; IP65 with a surface or wall mount kit
    Colours
    White or black
    Recess cut-out
    Min Ø80 mm
A meeting room with a ceiling sensor and a three-button switch by the door.

Room and wireless kits

Paired before delivery for common jobs, so each one works straight from the box.

  • Meeting room solution

    A three-button wireless switch and a DALI sensor. People switch, dim and recall presets, while the sensor handles occupancy. For new rooms or retrofits.

    Includes
    Wireless 3-button smart switch, DALI sensor with built-in DALI power supply
    Controls
    Up to 15 DALI lights wired to the sensor
    Setup
    No programming after installation
    Sensing
    Presence or absence; 19-minute time-out with a 1-minute warning
    Override
    The switch overrides the sensor
    Supply
    240 VAC
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C

  • Wireless switch kit

    A wireless switch and relay for retrofit lighting circuits. It needs only a 240 V supply at the switch, with no control wiring.

    Includes
    1-button switch with 1 relay, or 2-button switch with 2 relays
    Load
    10 A at 240 VAC per relay; a voltage-free relay is available
    Expansion
    Add switches for more locations; add relays for more loads
    Setup
    Paired before delivery, no Wi-Fi
    Wireless range
    Keep each device within 15 m of the next
    Mounting
    Standard 84 mm plate
    Colours
    White or black
    Rating
    IP20, indoor, 0 to 45°C

For designers and consultants

Every kit has a standard system diagram for your drawings, with notes on power, wiring and wireless range. Ask for the diagrams and specs with your quote, and choose "ReadyToGo – standalone" under Control system.

Request a quote Tell us the room, the lights and how you want to control them.

Kit contents, ratings and lead times are confirmed on quotation. Switch kits control up to 30 DALI lights and sensor or wireless kits up to 15; for more, we will recommend a bigger setup.

Request a quote

Have a project in mind?

Illuminate your space with our lighting solutions. Our lighting specialists are ready to assist you with all the information you require.

Request a quote Call +61 2 9127 7736